How to Fix Electrolux Dryer? Learn The Process Easily!

If your Electrolux dryer is not working, check for common issues such as a tripped circuit breaker, a faulty thermal fuse, or a worn drive belt. Solutions may include resetting the circuit breaker, replacing the thermal fuse, or installing a new drive belt.

If your Electrolux dryer isn’t working, first, ensure the circuit breaker is not tripped and check for power supply. If the dryer still won’t start, test the thermal fuse with a multimeter and replace it if necessary.

For drum issues, inspect the drive belt for wear and replace if needed. Keep the lint filter clean to avoid overheating. Consult the user manual or contact Electrolux customer support for further guidance. For intricate problems, consider seeking assistance from a professional technician.

How to Fix Electrolux Dryer

Troubleshooting Common Issues

Dealing with a malfunctioning Electrolux dryer can be frustrating, especially when you have a load of laundry waiting to be dried. Fortunately, many common issues can be easily resolved with a little troubleshooting.

In this article, we will guide you through the process of identifying and fixing some of the most common problems that you may encounter with your Electrolux dryer.

Dryer Not Turning On

If your Electrolux dryer is not turning on, there could be a few possible causes. Start by checking if the dryer is properly plugged into a power outlet. Ensure that the outlet is functioning correctly by plugging in another device. If the outlet is working fine, then it is likely an issue with the dryer itself.

First, make sure that the door of the dryer is closed securely. Electrolux dryers have a safety feature that prevents them from starting if the door is not properly closed. If the door is closed but the dryer still doesn’t turn on, check the control settings. Ensure that you have selected the right cycle and that the controls are properly functioning.

If all else fails, the problem may lie in the power cord or the thermal fuse. Inspect the power cord for any damage or loose connections. If necessary, replace the power cord with a new one. The thermal fuse, located near the exhaust duct, is designed to trip if the dryer overheats. If it has blown, it will need to be replaced in order for the dryer to turn on again.

Dryer Not Heating

If your Electrolux dryer is running, but not producing any heat, there are a few possible causes to investigate. Start by checking the lint filter. A clogged or dirty lint filter can restrict airflow, causing the dryer to heat inefficiently or not at all. Clean the lint filter and ensure that it is properly inserted back into the dryer.

Next, check the exhaust vent for any obstructions. A blocked vent can prevent proper airflow and lead to heating issues. Remove any lint buildup or debris from the vent and ensure that it is clear of any obstructions.

If the lint filter and vent are clear, the problem may be a faulty heating element or thermostat. The heating element is responsible for producing heat, while the thermostat regulates the temperature. Consult the Electrolux dryer manual for instructions on how to test and replace these components if necessary.

Dryer Not Spinning

If your Electrolux dryer is not spinning, the issue may lie with the belt or the motor. Start by checking the belt for any signs of wear or damage. If the belt is frayed, broken, or loose, it will need to be replaced. Consult the dryer manual for instructions on how to remove and replace the belt.

If the belt seems to be in good condition, the problem may be with the motor. A faulty motor can prevent the drum from spinning. Inspect the motor for any signs of malfunction, such as excessive noise or a burning smell. If you suspect a motor issue, it is best to contact a professional technician for further assistance.

Troubleshooting common issues with your Electrolux dryer can save you time and money. By following these steps, you can quickly identify and resolve many of the problems that can arise with your dryer, ensuring that your laundry is dried efficiently and effectively.

Checking Power Supply

When your Electrolux dryer refuses to start or isn’t heating properly, a common troubleshooting step is to check the power supply. Oftentimes, a simple issue with the power connection can be the cause of the problem. In this section, we will walk you through the steps to ensure that your dryer is receiving adequate power supply.

Ensuring The Dryer Is Properly Plugged In

Start by inspecting the power cord of your Electrolux dryer. Verify that it is securely plugged into a working electrical outlet. Confirming this is crucial as, at times, the cord may have become loose or accidentally unplugged. Ensure the connection is tight enough to prevent any power interruptions. If the outlet appears loose or damaged, consider using another outlet or consult a qualified electrician to fix the issue.

Checking The Circuit Breaker

Another potential culprit for power supply issues is a tripped circuit breaker. Faulty electrical connections or fluctuations in power may cause the circuit breaker to trip, cutting off power to the dryer. Head over to the circuit breaker box in your home and check for any breaker that has switched to the “OFF” position. If you find one, toggle it back to the “ON” position. It is worth mentioning that if the circuit breaker trips repeatedly, it could indicate a more significant problem. A licensed electrician should be consulted to investigate and fix any underlying electrical issues.

Testing The Outlet For Power

Lastly, you need to verify if the outlet itself is providing power. To do this, you can use a multimeter or an outlet tester. With the dryer turned off and unplugged, insert the prongs of the testing device into the outlet and check for a reading or indication of power. If the reading shows no power, it is likely that the outlet is faulty or not receiving electricity. In such cases, you may need to contact a qualified electrician to repair or replace the outlet.

By following these steps, you can ensure that your Electrolux dryer is receiving a proper power supply. If the problem persists even after checking the power supply, further troubleshooting or professional attention may be needed to resolve the issue.

Assessing The Heating Element

When it comes to troubleshooting your Electrolux dryer, one of the first components you should inspect is the heating element. The heating element is responsible for producing the necessary heat to dry your clothes effectively. Over time, it may get damaged or fail, leading to a dryer that no longer produces heat. In this section, we will guide you through the process of assessing the heating element to determine if it is the cause of your dryer’s heating issue.

Inspecting The Heating Element For Damage

Before you jump to any conclusions, it’s important to inspect the heating element for any signs of damage properly. A damaged heating element can prevent your dryer from heating up at all. To inspect the heating element, follow these steps:

  1. Ensure the dryer is disconnected from the power source.
  2. Locate the heating element, which is usually found at the rear of the dryer.
  3. Examine the heating element for any visible signs of damage, such as breaks, burns, or areas covered in rust.
  4. If you notice any damage, it’s a clear indication that the heating element needs to be replaced.

By thoroughly inspecting the heating element, you can quickly identify whether it is the cause of your dryer’s heating problem. If you do find any visible damage, proceed to the next step to confirm the issue using a multimeter.

Testing The Heating Element With A Multimeter

To further diagnose whether the heating element is faulty, you can use a multimeter. A multimeter is a handy tool that measures electrical current, resistance, and voltage. Here’s how you can test the heating element using a multimeter:

  1. Make sure the dryer is disconnected from the power source before proceeding.
  2. Set your multimeter to the resistance or ohm setting.
  3. Disconnect the wires from the heating element terminals.
  4. Place the multimeter probes on the heating element terminals.
  5. If the multimeter reading shows “infinity” or an extremely high resistance, it indicates that the heating element is defective and needs to be replaced.
  6. However, if the multimeter reading shows a low resistance value, the heating element is likely not the cause of the heating problem, and you’ll need to explore other components.

Testing the heating element using a multimeter provides a more accurate diagnosis, allowing you to determine whether a replacement is necessary. If the multimeter confirms a faulty heating element, it’s time to move on to the final step of this troubleshooting process.

Replacing A Faulty Heating Element

Replacing a faulty heating element is a relatively straightforward process that you can do yourself. However, before proceeding, it’s essential to reference your dryer’s manual for specific instructions tailored to your model. Here is a general overview of the steps involved:

  1. Ensure the dryer is disconnected from the power source.
  2. Take note of the existing wiring and connections of the heating element.
  3. Detach the wires connected to the heating element terminals.
  4. Remove any mounting brackets or screws that secure the heating element to the dryer.
  5. Replace the old heating element with a new one, ensuring it matches the original specifications of your model.
  6. Reinstall any mounting brackets or screws and reattach the wiring in their correct positions.
  7. Finally, reconnect the dryer to the power source and test it to ensure the new heating element resolves the heating issue.

By following these steps, you can successfully replace a faulty heating element in your Electrolux dryer, restoring its ability to generate the necessary heat for drying your clothes efficiently.

Examining The Drum Belt

Examining the drum belt is crucial to fixing your Electrolux dryer. By inspecting and replacing any faulty or worn belts, you can ensure smoother operation and prevent potential damage.

Identifying Signs Of A Worn Or Broken Drum Belt

Identifying signs of a worn or broken drum belt is crucial for determining whether you need to repair or replace your Electrolux dryer. A faulty drum belt can result in various issues, including the dryer not spinning or heating properly. Here are a few telltale signs that indicate a problem with the drum belt:

  • Excessive noise: If you hear unusual sounds, such as squeaking, thumping, or grinding, while the dryer is in operation, it could be an indication of a worn or damaged drum belt.
  • Drum not turning: When you start your dryer and find that the drum isn’t spinning, it may be due to a broken or loose drum belt.
  • Visible wear or damage: Inspect the drum belt visually by opening the dryer door and looking for any fraying, cracks, or tears. A worn or broken drum belt should be promptly replaced to avoid further damage to your dryer.

Removing The Drum Belt For Inspection

Before you can inspect the drum belt, you need to remove it from your Electrolux dryer. Follow these steps to remove the drum belt safely:

  1. Unplug the dryer from the power source to eliminate any risk of electric shock.
  2. Open the dryer door and locate the drum. You may need to remove the lint filter and/or unscrew any retaining screws holding the top or front panel in place.
  3. Once you have access to the drum, locate the tensioner pulley and release the tension by either pushing or pulling it away from the drum belt.
  4. With the tension released, carefully slide the drum belt off the motor pulley and any other pulleys it may be routed around.
  5. Inspect the removed drum belt for any signs of wear, cracking, or stretching. Pay close attention to the edges and the grooves where it contacts the drum and pulleys.

Installing A New Drum Belt

After inspecting the drum belt and determining that it needs to be replaced, it’s time to install a new one. Follow these steps for a smooth installation process:

  1. Make sure the replacement drum belt matches the specifications of the original one. You can find this information in your Electrolux dryer’s manual or consult the manufacturer’s website.
  2. Slide the new drum belt around the drum, ensuring it is aligned with the grooves and sits flat against the drum surface.
  3. Route the drum belt around the motor pulley and any other pulleys according to the diagram or instructions provided in the manual.
  4. Apply tension to the drum belt by pulling or pushing the tensioner pulley away from the belt. This helps maintain the proper tension for smooth operation.
  5. Rotate the drum by hand to double-check that the drum belt is properly seated and aligned.
  6. Reassemble any panels or components that were removed during the inspection process.
  7. Plug the dryer back into the power source and test it by running a short drying cycle.

By following these steps, you should be able to examine and replace the drum belt in your Electrolux dryer with ease. Remember to always prioritize safety and consult the manufacturer’s instructions for specific model details. Don’t hesitate to seek professional assistance if you are unsure or uncomfortable performing the repairs yourself.

Addressing Ventilation Problems

Proper ventilation is crucial for the efficient performance of your Electrolux dryer. When your dryer’s ventilation system encounters issues, it can lead to longer drying times, inadequate clothes drying, and even a potential fire hazard. To prevent such problems, it’s essential to address ventilation issues promptly.

In this section, we will discuss three fundamental steps you can take to fix ventilation problems with your Electrolux dryer.

Clearing Clogged Vents And Ducts

A common cause of poor dryer ventilation is clogged vents and ducts. Over time, lint and debris can accumulate, obstructing the airflow and reducing the efficiency of the dryer. To clear clogged vents and ducts, follow these steps:

  1. Disconnect the dryer: Ensure the dryer is completely disconnected from the power source before proceeding.
  2. Locate the vent and ducts: Depending on the model, the vent and ducts may be located at the back or on the side of the dryer. Refer to the user manual to find them.
  3. Remove the clog: Use a vacuum cleaner or a vent brush to carefully remove the accumulated lint and debris from the vents and ducts.
  4. Reconnect and test: Once the vents and ducts are clear, reconnect the dryer to the power source and run a test cycle to ensure the airflow is restored.

Checking The Exhaust Hoses For Obstructions

In addition to clogged vents and ducts, obstructions in the exhaust hoses can also hinder the proper ventilation of your Electrolux dryer. Here’s how you can check for and remove obstructions:

  1. Disconnect the dryer: Make sure the dryer is unplugged to avoid any electrical accidents.
  2. Locate the exhaust hoses: Locate the exhaust hoses at the back or side of the dryer, depending on the model.
  3. Inspect the hoses: Carefully examine the hoses for any tears, kinks, or blockages that might impede the airflow.
  4. Remove obstructions: If you notice any obstructions, remove them by gently pulling or cutting them away.
  5. Reconnect and test: Once the hoses are clear, reconnect the dryer and run a test cycle to ensure the free flow of air.

Enhancing Dryer Ventilation Efficiency

To enhance the ventilation efficiency of your Electrolux dryer and prevent future issues, consider the following tips:

  • Shorten the vent length: If possible, ensure that the venting system is as short as possible, as long vents can increase drying time and hinder airflow.
  • Use smooth and rigid venting materials: Opt for rigid metal ducts instead of flexible ones, as they provide better airflow.
  • Regularly clean the lint filter: Remove and clean the lint filter after each drying cycle to prevent lint buildup and improve ventilation.
  • Inspect and maintain the vent system: Regularly check the vent system for leaks, damages, or loose connections. Address any issues promptly to ensure optimal performance.

By following these steps and incorporating these tips into your dryer maintenance routine, you can effectively address ventilation problems with your Electrolux dryer, enhance its performance, and ensure the safety of your home.

How to Fix Electrolux Dryer

Electrolux Dryer Keeps Stopping

If your Electrolux dryer keeps stopping before the cycle is complete, several factors could be contributing to the issue. Start by checking if the load size is appropriate and not exceeding the dryer’s capacity.

Additionally, examine the lint filter for any blockages and clean it if necessary. Inspect the exhaust vent for obstructions and ensure proper airflow. Overloading the dryer or a restricted vent can cause overheating, triggering the automatic shutdown feature.

If the problem persists, it’s recommended to consult the user manual for troubleshooting steps or contact Electrolux customer support for assistance. Sometimes, a professional technician may be needed to diagnose and address the underlying problem.

How To Fix Electrolux Dryer Belt?

To fix the belt on your Electrolux dryer, start by unplugging the appliance for safety. Open the dryer door and remove the top panel by unscrewing or releasing clips. Depending on the model, you may also need to remove the front panel to access the belt. Release tension on the belt by moving the tensioner pulley away, then slide the old belt off the drum and motor pulley.

Install the new belt by looping it around the drum and motor pulley. Reassemble the dryer by securing the front and top panels. Finally, plug the dryer back in and run a test cycle to ensure the belt functions properly.

For detailed instructions, refer to your Electrolux dryer’s user manual or consider seeking professional assistance if needed.

Frequently Asked Questions On How To Fix Electrolux Dryer

How Do You Reset An Electrolux Dryer?

To reset an Electrolux dryer, locate the power cord and unplug it from the outlet. Wait for a few minutes, then plug it back in. Press the power button to turn on the dryer.

Why Is My Electrolux Drying Not Working?

The Electrolux drying may not be working due to several reasons such as a clogged vent, a faulty heating element, or a malfunctioning thermostat. It’s essential to check these components and seek professional assistance if necessary. Keep the dryer clean to ensure optimal performance.

What Causes A Dryer Just To Stop Working?

Possible causes for a dryer to stop working include a faulty thermal fuse, broken door switch, or malfunctioning timer. Other reasons could be a defective motor, damaged heating element, or a clogged vent. Regular maintenance and professional inspections can help prevent these issues and ensure proper dryer functionality.

Where Is The Fuse On The Electrolux Dryer?

The fuse on the Electrolux dryer is located near the heating element or blower housing. It is a small, cylindrical device that helps protect the dryer from overheating by cutting off the power if necessary.

How To Fix An Electrolux Dryer That Won’t Start?

If your Electrolux dryer won’t start, check if the power cord is properly plugged in. Also, ensure the door is closed securely.


Repairing your Electrolux dryer doesn’t have to be a daunting task. By following the troubleshooting steps outlined in this blog post, you can quickly identify and fix common issues. Remember to check the power supply, clean the lint filter, and inspect the heating element and thermostats.

With a bit of patience and attention to detail, you can have your dryer working efficiently again in no time. Happy repairing!

Leave a Comment