Inglis Dryer Not Drying Clothes

Inglis dryer not drying clothes could be due to a faulty thermal fuse or a clogged dryer vent. Check these areas for issues.

A malfunctioning dryer can be a nuisance, especially when it fails to dry your clothes. Inglis dryers are known for their durability and efficiency, but they too can develop problems over time. One of the most common complaints is that the dryer is not drying clothes as expected.

Several factors can contribute to this issue, from a clogged vent to a defective part. If left unaddressed, this problem can lead to longer drying times, higher energy bills, and even safety hazards. Fortunately, most dryer troubleshooting steps are simple and can be done without special tools or skills. We’ll show you what to do if your Inglis dryer is not drying clothes and how to fix the problem.

Inglis Dryer Not Drying Clothes


Check The Settings

To troubleshoot an Inglis dryer not drying clothes, checking the settings is crucial. Make sure the dryer is set on the appropriate heat setting and the moisture sensors are clean and functioning properly to ensure efficient drying.

If you’re experiencing an issue with your Inglis dryer not drying clothes, the most likely culprit could be the settings. In some cases, the settings on the dryer could be incorrect, leading to the dryer not drying clothes as it should. By taking a closer look at the settings, you can determine if they are causing the issue and quickly make the necessary adjustments. Let’s take a closer look at the specific settings you’ll want to check upon discovering this issue.

Check The Cycle Settings

The first thing you’ll want to check is the cycle settings. Ensure that you have selected the appropriate cycle for the type of clothes you want to dry. For example, if you’re trying to dry a load of towels, you’ll want to select the “towels” setting. Additionally, you’ll want to ensure that you have selected the appropriate drying time for the load. Some loads may require more time to dry completely compared to others, so adjust accordingly.

Verify The Temperature Settings

Another setting to check is the temperature settings. Make sure that you have selected the correct temperature for the type of clothes you are drying. Most dryers have a variety of temperature settings, including high, medium, and low. If you’re not sure which temperature setting to use, refer to the care label on your clothing for guidance. In conclusion, when your Inglis dryer isn’t drying clothes, you should first check the cycle and temperature settings. A simple adjustment to these settings could make a big difference in how well your dryer performs. By taking the time to ensure that the settings are correct, you can enjoy perfectly dry clothes every time you use your dryer.
Inglis Dryer Not Drying Clothes


Check The Vent

One possible response to this prompt, adhering to the guidelines, could be: Check the vent of your Inglis dryer if it’s not drying clothes efficiently. A clogged or blocked vent can limit airflow and make the dryer overheated. Regular cleaning and maintenance of the vent can help improve the dryer’s performance.

Is your Inglis dryer not drying clothes properly? One significant explanation could be a blocked vent. When lint and debris accumulate in the vent, it restricts the warm air from moving out of the dryer, which affects the drying performance. In this blog, we will guide you through inspecting your dryer’s vent and exploring feasible solutions to fix the issue.

Check The Vent Hose

The vent hose carries the moist air outside the dryer. Over time, it may become blocked with lint or crimped, which restricts the airflow and causes the dryer to overheat or stop drying clothes thoroughly. To check the vent hose:
  • Unplug the dryer from the electrical source.
  • Move the dryer away from the wall to access the vent hose.
  • Visually inspect the vent for any lint buildup or obstructions.
  • Run your hand through the hose to feel for any blockages or lint.

Clear The Vent

If you notice any lint build-up or blockages in the vent hose, it’s time to clean it. Here’s how:
  1. Unplug the dryer from the electrical source.
  2. Disconnect the vent hose from the dryer.
  3. Use a vent cleaning brush or a vacuum cleaner with a hose attachment to remove any lint buildup or debris.
  4. Reconnect the vent hose to the dryer.
  5. Run the dryer empty for a few minutes to ensure proper airflow.
Cleaning the vent can be a quick and easy solution to improve your dryer’s performance and help you save money on energy bills. If your dryer continues to not dry clothes properly, it could be a malfunctioning thermostat, heating element, or another mechanical issue. In such cases, it’s best to contact a professional appliance repair technician for a proper diagnosis.


Checking and cleaning the dryer’s vent hose is an effective solution to improve your Inglis dryer’s performance. Regular maintenance of the vent will not only prevent the dryer from not drying clothes properly, but it will also reduce the risk of fire hazards and enhance the overall lifespan of your dryer.

Check The Lint Filter

One possible solution to the problem of an Inglis dryer not drying clothes might be checking the lint filter. A clogged filter can prevent proper air circulation and reduce drying effectiveness. Simply removing and cleaning the filter could improve the performance of the dryer and save time and energy.

If your Inglis dryer is not drying clothes properly, there are several things that could be causing the issue. One of the most common causes is a clogged lint filter. When the lint filter is clogged, hot air cannot circulate through the dryer and clothes take longer to dry.

Clean The Lint Filter

To check the lint filter, simply remove it from the dryer and give it a quick clean. If you see any visible lint or debris, use a soft brush or cloth to gently remove it. If the filter appears to be damaged or worn out, it may need to be replaced.

Check For Clogs

If your lint filter is clean and your dryer still isn’t drying clothes properly, the next step is to check for clogs. Start by checking the vent hose and exterior vent to make sure they are clear of any debris or obstructions. If they are clear, you may need to check the inside of the dryer for clogs. To do this, unplug the dryer and remove the back panel to access the lint trap area. Use a vacuum cleaner or a brush to remove any lint or debris from the area. Once you have checked for clogs, reassemble the dryer and test it to see if it is drying clothes properly. In summary, if your Inglis dryer is not drying clothes properly, the first thing you should do is check the lint filter. A clogged lint filter is often the cause of this problem. If the lint filter is clean, you should check for clogs in the vent hose, exterior vent, and inside the dryer. By taking these simple steps, you can ensure that your dryer is working properly and your clothes will be dry in no time.

Inspect The Heating Element

One possible response could be: To troubleshoot an Inglis dryer not drying clothes, inspect the heating element. Make sure it is not defective or broken, and test its continuity with a multimeter. Replace the part if necessary to restore the dryer’s heating function and dryness.

If your Inglis dryer is not drying your clothes properly, one of the main causes of the problem could be the heating element. The heating element is a critical component that generates the heat necessary to dry your clothes effectively. If the heating element malfunctions or fails to work as it should, your dryer may not dry the clothes as expected. So, you need to inspect the heating element thoroughly to identify the issue and fix it. Here are the steps to do it.

Identify The Heating Element

The heating element in an Inglis dryer is a long coil of metal located inside the machine’s cabinet. To locate the heating element, you need to unplug the appliance and remove the rear panel from the dryer. Once you have access to the inside of the machine, locate the heating element, which should be a long, thin, and coiled like a snake. The heating element is connected to wires attached to the back panel of the dryer.

Test The Heating Element

To test the heating element, you need a multimeter or continuity tester. Turn off the power to the dryer, remove the wires attached to the heating element, and test the element for continuity. The resistance should be between 5 and 50 ohms. If the continuity tester fails to light up, the heating element is faulty, and you need to replace it. If the heating element is okay, you need to check the thermostat, thermal fuse, or the high-limit thermostat. These components also play a crucial role in regulating the dryer’s temperature as it dries clothes. If any of these parts malfunction, it may also prevent the dryer from heating up properly. In conclusion, inspecting the heating element is crucial for fixing the Inglis dryer when it fails to dry clothes properly. By following the steps outlined in this post, you can identify and fix the issue with ease. So, try to test the heating element and other components to ensure your dryer works effectively.

Check The Electrical Connections

If your Inglis dryer is not drying clothes, the first thing you should do is check the electrical connections. Many people overlook this step, assuming that there must be something wrong with the dryer itself.

Inspect The Power Cord

The first thing you should do when checking the electrical connections is to inspect the power cord. Make sure it is plugged in properly and that there are no frayed wires or other damage to the cord. If there is damage, you will need to replace the cord before using the dryer again.

Test The Electrical Connections

Next, you should test the electrical connections to ensure that they are working properly. Start by checking the outlet to make sure it is providing the correct voltage. You can do this with a multimeter or voltage tester. If the outlet is not providing the correct voltage, you will need to have an electrician fix the problem.

If the outlet is working properly, you should check the connections between the power cord and the dryer. Make sure they are tight and secure. If they are loose, the dryer may not be getting enough power to operate properly. Tighten the connections and try running the dryer again.

If none of these steps resolves the problem, there may be a malfunction with the dryer’s electrical system. In this case, you will need to contact a professional repair service to diagnose and repair the issue.

Inglis Dryer Not Drying Clothes


Inspect The Thermostat

To troubleshoot an Inglis dryer not drying clothes, inspect the thermostat for faults. The thermostat regulates the temperature inside the dryer and a broken one could be preventing it from heating up enough to dry the clothes.

If your Inglis dryer is not drying clothes, one of the potential culprits could be a faulty thermostat. The thermostat is the component in the dryer that regulates the temperature, ensuring that it doesn’t get too hot, and clothes are dried evenly. A broken thermostat can cause the dryer to stop working altogether or overheat resulting in damp clothes, tepid clothes even after several cycles. Here’s how to inspect the thermostat:

Identify The Thermostat

Before inspecting the thermostat, it’s essential to identify where it is located in the dryer. In most cases, you’ll find the thermostat in the blower housing unit or on the heating element housing. Refer to the dryer’s manual to identify the thermostat’s exact location.

Test The Thermostat

Once you have identified the thermostat, the next step is to test it. You’ll need a multimeter to do this test. Set the meter to the RX1 scale and remove the wires from the thermostat. Touch the probes of the meter to each of the thermostat’s terminals. If the meter reading shows infinity, it means the thermostat is faulty and needs to be replaced. If the reading shows zero resistance, the thermostat is functioning correctly. However, before you reinstall it, it’s essential to check the other components of the dryer to ensure they are working correctly. Re-installation of the thermostat while there are other faulty parts can damage the thermostat.


Before replacing the thermostat, ensure that it is the cause of the issue as other critical dryer components such as fuses or heating elements can affect the dryer’s functioning. By following these simple steps, you can effectively inspect and test your Inglis dryer’s thermostat and identify the problems resulting in undried or damp clothes.

Call A Professional

If your Inglis dryer isn’t drying your clothes properly, it could be due to a range of issues. To diagnose and fix the problem, it’s best to call a professional who can help identify the root cause and provide the necessary repairs.

Save yourself time and stress by reaching out to an experienced technician.

Sometimes, despite your best efforts, your Inglis dryer may not dry clothes as it should. If you’ve tried all the tips and tricks to get your dryer working but it’s still not drying your clothes, it’s time to call a professional. In this section, we’ll look at when to call a professional and how to find the right one for the job.

When To Call A Professional

Knowing when to call a professional can save you time, money, and frustration. Here are a few signs that it’s time to call in a professional to repair your Inglis dryer:
  • The dryer takes longer than usual to dry clothes
  • The dryer generates unusual noises
  • The dryer shut off unexpectedly or doesn’t start
  • The dryer gives off strange odors
  • The dryer is overheating
When you notice any of these signs, it’s best to call in a professional to repair your Inglis dryer.

How To Find A Professional

When looking for a professional to repair your Inglis dryer, here are some key things to consider:
  1. Check for referrals from family, friends, or neighbors who have had a similar issue
  2. Verify that the professional you choose is licensed and insured
  3. Read customer reviews to gauge the quality of service they provide
  4. Discuss the repair process, associated costs, and estimated time of completion.
You can also check with the Better Business Bureau (BBB) for a list of accredited Inglis dryer repair services. Remember that it’s always advisable to opt for an expert with years of experience and a professional and friendly attitude. In summary, when you realize that your Inglis dryer is not drying clothes, it’s crucial to bring in a professional to avoid any further damage. By keeping an eye on signs of malfunction and following simple steps to find a credible professional, you’ll have your dryer back in working order in no time!

Preventative Maintenance

If your Inglis dryer is not drying clothes, it could be due to several reasons, ranging from clogged vents to malfunctioning thermostats. However, one of the most common causes is lack of preventive maintenance. By taking good care of your dryer, you can avoid a wide range of problems, including poor heating, fire hazards, and reduced lifespan. Here are two essential maintenance tasks that can prevent your Inglis dryer from not drying clothes.

Cleaning The Dryer Regularly

Over time, your Inglis dryer can accumulate lint, dirt, and debris, which can clog the vents, hinder airflow, and reduce the efficiency of the heating mechanism. To prevent this, you should clean your dryer regularly. Here are some tips:

  • Remove the lint filter and clean it thoroughly after each cycle.
  • Use a vacuum cleaner to remove any lint or debris from the filter housing, vent pipe, and drum.
  • Inspect the vent pipe for any obstructions or damages and repair or replace it as necessary.
  • Wipe the exterior of the dryer with a damp cloth to remove any dust or dirt.

By cleaning your Inglis dryer regularly, you can reduce the risk of overheating, prolong the lifespan of the machine, and ensure it dries clothes efficiently.

Performing Routine Inspections

In addition to cleaning your dryer, you should also perform routine inspections to ensure it is working correctly. Here are some things to check:

  • Verify that the power supply is connected correctly and that the circuit breaker is not tripped.
  • Check the thermostat, thermal fuse, and heating element for any signs of wear or damage.
  • Inspect the drum belt and rollers for any cracks or signs of wear and replace them if necessary.
  • Test the moisture sensor to ensure it is detecting the humidity level correctly.

By performing these routine inspections, you can identify any issues before they become severe, prevent costly repairs, and ensure your Inglis dryer dries clothes quickly and efficiently.


Based on the common issues discussed in this post, a malfunctioning dryer can cause a lot of frustration, leading you to search for a solution. Troubleshooting the Inglis dryer not drying clothes issue depends on identifying the root cause and checking the components one by one.

By following the tips and tricks mentioned here, you can fix the problem and prevent it from happening in the future. Don’t forget to maintain your dryer on a regular basis, keeping it clean and lint-free to ensure its longevity and proper functioning.

Leave a Comment