Whirlpool Dryer Control Panel Not Working

If your Whirlpool dryer control panel isn’t working, first check the power supply and circuit breaker. If those are okay, there may be a problem with the control board that needs professional repair or replacement.

This can happen due to electrical issues, wear and tear, or a malfunction. A malfunctioning Whirlpool dryer control panel can disrupt your daily routine and leave your laundry piling up. However, diagnosing and solving the issue can save you time and money.

We will cover common reasons for a malfunctioning dryer control panel and tips on troubleshooting. By understanding the potential causes and solutions, you can get your Whirlpool dryer back up and running efficiently in no time. Keep reading to find out how to address this frustrating problem and avoid costly repairs or replacements.

Whirlpool Dryer Control Panel Not Working

Credit: www.ifixit.com

Common Causes

Whirlpool dryers are efficient appliances that help simplify your laundry routine. However, a malfunctioning control panel can cause frustration and inconvenience. Understanding the common causes of a Whirlpool dryer control panel not working can help you troubleshoot the issue effectively. Here are the three main culprits to consider:

A common reason for a malfunctioning control panel is a power problem. Ensure that the dryer is properly plugged into a working power outlet. Check if the circuit breaker has tripped or a fuse has blown. It’s also essential to inspect the power cord for any damage or loose connections. Resolving power issues is often the first step in restoring the functionality of your Whirlpool dryer control panel.

The control board is a vital component of the dryer’s control panel. If it becomes faulty, the panel may stop functioning correctly. A control board issue can be caused by electrical surges, manufacturing defects, or wear and tear over time. To determine if the control board is the problem, look for signs such as unresponsive buttons, error codes, or erratic behavior. In such cases, replacing the control board may be necessary to resolve the issue.

Another potential cause of a non-responsive control panel is broken buttons. Over time, buttons may wear out or become damaged due to excessive use. Inspect the buttons on the control panel for signs of physical damage, such as cracks or loose connections. If any buttons appear faulty, they may need to be replaced. Replacing individual buttons or the entire control panel can help restore proper functionality.

Troubleshooting Steps

In case your Whirlpool dryer control panel is not working properly, don’t worry! There are a few troubleshooting steps you can take to determine the issue and potentially fix it yourself. Here are some simple yet effective steps you can follow:

Check Power Supply

If your Whirlpool dryer control panel isn’t responding, the first thing you should check is the power supply. Make sure the dryer is plugged in securely and there is power available. You can quickly check this by turning on a nearby light or appliance to see if it is working. If you find no power, check the circuit breaker or fuse box and reset or replace it as needed.

Reset Control Panel

If the power supply is not the issue, the next step is to try resetting the control panel. To do this, locate the reset button on the control panel and press and hold it for a few seconds. This will reset the control panel and may resolve any software glitches that could be causing the issue. Once the reset is complete, check if the control panel is functioning properly.

Inspect Buttons And Wiring

If resetting the control panel didn’t solve the problem, it’s time to inspect the buttons and wiring. Start by carefully examining the control panel buttons for any signs of damage, such as loose or stuck buttons. If you notice any issues, try gently cleaning the buttons or replacing them if necessary.

After inspecting the buttons, check the wiring connections behind the control panel. Ensure that all the wires are securely connected and there are no loose connections or frayed wires. If you find any faulty wiring, it’s best to consult a professional for repairs.

Remember, these troubleshooting steps are meant to help identify common issues with Whirlpool dryer control panels. However, if the problem persists or you are unsure about performing any of these steps, it’s always recommended to contact a professional technician for assistance. By following these simple troubleshooting steps, you can potentially resolve the issue and get your Whirlpool dryer control panel working again in no time!

Power Issues

If your Whirlpool dryer control panel is not working, it can be a frustrating experience. One of the most common causes for this issue is power-related problems. It’s essential to check the power source and components to ensure your dryer operates correctly. Below are a few simple steps to diagnose power issues that may be affecting your Whirlpool dryer.

Check Power Outlet

First, make sure the power outlet your dryer is connected to is working properly. Plug in another device to test if the outlet is providing power. If the outlet is not functioning, check the circuit breaker or fuse box to see if the circuit may have tripped or blown a fuse. Addressing power outlet issues can often resolve control panel problems.

Test Power Cord

Inspect the power cord for any visible damage or wear. Over time, the power cord can become frayed or damaged, which may lead to power interruptions. Ensure the power cord is securely plugged into the outlet and the dryer. You can also use a multimeter to test the continuity of the power cord to determine if it is delivering power to the dryer.


Faulty Control Board

A faulty control board is a common issue that can cause a Whirlpool dryer’s control panel to stop working. The control board is responsible for executing the commands to heat, tumble, and shut off the dryer. When it malfunctions, it can disrupt the entire operation of the dryer, leading to control panel issues and, ultimately, hindering its performance.

Check For Error Codes

To diagnose if a faulty control board is the cause of the Whirlpool dryer’s control panel not working, check for any error codes displayed on the panel. Error codes can indicate specific malfunctions within the control board, providing valuable insights into the underlying issue. Refer to the user manual for the dryer to interpret the error codes and understand the possible problems with the control board.

Replace Control Board

If the control board is deemed faulty and causing the control panel issues, replacing it may be necessary. A replacement control board can be obtained from the manufacturer or authorized dealers. Ensure the new control board is compatible with the specific model of the Whirlpool dryer. Follow the manufacturer’s guidelines or seek professional assistance to safely install the new control board and restore the proper functioning of the dryer’s control panel.

Broken Buttons

If you have a Whirlpool dryer and find that the control panel buttons are not working, it can be frustrating. This issue can prevent you from choosing the desired settings and starting the dryer. One common reason for this problem is broken buttons on the control panel. In this section, we will explore how you can troubleshoot and resolve the issue of broken buttons on your Whirlpool dryer control panel.

Inspect For Physical Damage

In order to determine if the buttons on your Whirlpool dryer control panel are broken, you need to visually inspect them for any physical damage. Here’s how you can do it:

  1. Start by carefully examining each button on the control panel, making sure to check for any cracks, dents, or signs of wear and tear.
  2. Next, use your fingers to press each button and check for any resistance or lack of response.
  3. If you notice that a button feels loose or wobbly, this may indicate internal damage.

By inspecting the control panel buttons for physical damage, you can determine if the issue is indeed with the buttons themselves. If you find any signs of damage, it’s time to take the next step.

Replace Buttons

If you have confirmed that the buttons on your Whirlpool dryer control panel are broken or damaged, you’ll need to replace them. Here’s how you can go about it:

  1. First, identify the model number of your Whirlpool dryer. You can usually find it on a sticker inside the door or on the back of the appliance.
  2. Once you have the model number, search for a replacement button kit specific to your dryer model. You can find these kits online or contact Whirlpool directly for assistance.
  3. Once you have the replacement button kit, carefully follow the instructions provided to remove the old buttons and install the new ones. Make sure to disconnect the dryer from the power source before starting the replacement process.
  4. After replacing the buttons, reconnect the dryer to the power source and test the control panel to ensure that the buttons are working properly.

Replacing the broken buttons on your Whirlpool dryer control panel should resolve the issue of the buttons not working. If you are unsure about the replacement process, it’s recommended to seek professional help or contact Whirlpool for assistance.

Whirlpool Dryer Control Panel Not Working

Credit: www.reddit.com

Whirlpool Dryer Control Panel Not Working

Credit: www.youtube.com


A malfunctioning control panel can be a frustrating issue to deal with when it comes to your Whirlpool dryer. However, there are several troubleshooting steps you can take to identify and potentially resolve the problem. From checking the power supply to inspecting the wiring connections, taking these steps can help get your dryer back up and running smoothly.

Remember to consult the user manual or seek professional assistance if needed. With a little patience and perseverance, you can rectify the control panel issue and enjoy the convenience of your fully functional Whirlpool dryer.

Leave a Comment