Xlerator Hand Dryer Troubleshooting

To troubleshoot Xlerator Hand Dryer, verify if there is electricity, check the sensor, and inspect the air filter. Xlerator Hand Dryer is a popular hand dryer known for its quick drying time and energy efficiency.

However, like all machines, it can encounter problems that need troubleshooting. We will guide you on how to troubleshoot a malfunctioning Xlerator Hand Dryer efficiently. With easy-to-follow steps, we will show you how to check if the dryer is receiving electricity, examine the sensor’s functionality and inspect the air filter.

By the end of this article, you will be an expert in fixing Xlerator Hand Dryer issues and ensure that people can keep their hands dry hygiene.

No Power

If your Xlerator hand dryer is not functioning, it may be due to a power issue. Check the power source and ensure there is adequate voltage and connectivity. If the issue persists, consult the troubleshooting guide provided by the manufacturer.

Check The Electrical Source

If your Xlerator Hand Dryer is not working due to no power, the first thing you need to check is the electrical source. Ensure that the dryer is properly plugged into an electrical socket, and the socket is powered up. If the socket is not working, plug the dryer into another socket to ensure that the fault is not with the dryer itself. Always remember to turn off the power supply before plugging or unplugging the dryer.

Check The Circuit Breaker

If the dryer is not turning on even after checking the electrical source, the next thing to investigate is the circuit breaker. Check if the circuit breaker has tripped and reset it if necessary. Resetting the circuit breaker could fix the problem. Also, check the amperage of the circuit breaker if it adequately supports the Xlerator Hand Dryer. A higher-amperage circuit breaker may be required for the dryer to work efficiently.

Check The Switch Button

If you have checked the electrical source and the circuit breaker, the next step is to examine the switch button. Ensure that the switch button is on and working properly. Sometimes, the button may not be fully engaged, resulting in no power supply. In such cases, gently press the switch button to make sure it is fully activated. If you have tried all the above troubleshooting steps and still cannot get power to the Xlerator Hand Dryer, you may need to call in a professional technician to assist you further. By following these steps, you can avoid unnecessary repair costs and ensure the uninterrupted flow of work.

Credit: www.amazon.com

Insufficient Airflow

Xlerator hand dryers are a popular choice for many commercial washrooms due to their fast and efficient performance. However, over time, you may experience issues with insufficient airflow which can impact their performance. In this blog post, we will discuss some troubleshooting tips to help you fix this problem.

Clean The Air Intake Filter

The air intake filter in your Xlerator hand dryer is responsible for preventing dust and debris from getting inside the machine. However, if it becomes clogged with dirt and dust, it can cause a reduction in airflow, making the hand dryer less effective. To clean the air intake filter:

1. Power off the machine
2. Remove the air intake grill by unscrewing the screw on the bottom of the unit
3. Clean the filter with a brush or vacuum cleaner
4. Replace the grill and screw it back into place
5. Power on the machine and test the airflow

Check The Motor

The motor in your Xlerator hand dryer is responsible for driving the fan that creates the airflow. If it becomes faulty, it can cause a reduction in airflow, which can affect the drying performance. To check the motor:

1. Power off the machine
2. Remove the air intake grill by unscrewing the screw on the bottom of the unit
3. Locate the motor and check for any visible signs of damage or wear and tear
4. If there are no visible signs of damage, turn the motor by hand to see if it rotates smoothly
5. If the motor does not rotate smoothly or shows signs of damage, it may need to be replaced

Check For Any Obstruction In The Path

If there is any obstruction in the path of the airflow, it can cause a reduction in airflow, which can affect the drying performance. To check for any obstruction:

1. Power off the machine
2. Remove the air intake grill by unscrewing the screw on the bottom of the unit
3. Check the fan blades for any debris or foreign objects
4. Use a brush or vacuum cleaner to remove any debris or foreign objects
5. Replace the air intake grill and screw it back into place
6. Power on the machine and test the airflow

Unusual Noise

If your Xlerator hand dryer is making unusual noise, it could be due to a few reasons. Check for loose parts, obstruction in the blower wheel or motor and replace if necessary. Ensure the dryer is properly installed and maintained regularly to prevent further issues.

If your Xlerator hand dryer is producing an unusual noise, it can be frustrating and concerning. You might wonder whether the noise is a sign of a serious problem. Thankfully, in most cases, the unusual noise can be resolved with simple troubleshooting. In this section, we’ll look at the steps you can take to check the motor, fan, and impeller wheel when you hear unusual noises from your Xlerator hand dryer.

Check The Motor

The motor is the most vital component of any hand dryer, including the Xlerator hand dryer. So, if you hear any weird noises from your hand dryer, the first thing you should do is check the motor. Make sure that the motor is running smoothly and not producing any grinding, humming, or chattering noises. If there is a problem with the motor, it can be due to the motor bearings, worn brushes, or a faulty armature. In such a case, it is recommended that you replace the motor. However, if you are unsure about replacing it yourself, you can call a professional for assistance.

Check The Fan

The Fan is another critical component of the Xlerator hand dryer, which ensures that the air is circulated efficiently. If the fan is running at a slower pace or producing a strange noise, it can lead to the hand dryer not functioning correctly. To verify whether the fan is overheating or producing a strange noise, turn off the hand dryer, open up the cover and visually inspect the fan blades and surrounding areas for any obstructions or damages. If the fan is obstructed, remove the obstructions carefully,then re-start your hand dryer to see if the issue has been resolved. If the issue persists, the fan motor possibly needs lubrication or replacement – reach out to your professionals for assistance.

Check The Impeller Wheel

The impeller wheel of your Xlerator hand dryer rotates to pull air from the intake vent. Any obstructions in its hole or the wheel can cause unusual noises. So, you should check the impeller wheel to ensure that there are no obstructions or damage. To do this, turn off your hand dryer, open up the cover and inspect the impeller wheel for any visible wear or damage. Also, ensure that the screws holding the impeller wheel are tightly in position. If the impeller wheel is damaged or broken, it will need to be replaced. However, if it is simply obstructed, clean it with a soft brush or cloth. In summary, you can troubleshoot an unusual noise coming from your Xlerator hand dryer by checking the motor, fan, and impeller wheel. If you cannot resolve the issue yourself, don’t hesitate to reach out for professional assistance.

Faulty Heating Element

One common issue with Xlerator hand dryers is a faulty heating element. This can result in the dryer not producing enough heat to dry hands efficiently. If you are experiencing this problem, it is important to have the heating element replaced to ensure optimal performance of your Xlerator hand dryer.

If your Xlerator hand dryer is not emitting hot air or takes too long to dry hands, a faulty heating element could be the culprit. The heating element heats the air that the hand dryer blows, thereby drying hands quickly. Therefore, if it is faulty, it will affect the drying speed, making it less efficient. Before you panic and replace the entire unit, you might want to troubleshoot the heating element to know if there is a minor issue or just replace it if the inspection shows that the element is faulty.

Replace The Heating Element

To troubleshoot your Xlerator hand dryer, you must first stop the electric supply, inspect the unit, and determine if you need to replace the heating element using the following steps:

1. Disconnect the hand dryer from the power supply.
2. Remove the hand dryer’s LEXAN cover by unscrewing it.
3. Inspect the heating element to check if it glows red when connected to power or if there is any visible damage like cracks or loose connections. If it doesn’t glow red, then it is faulty and needs replacement.
4. Unscrew and detach the faulty element from the hand dryer.
5. Replace it with a new heating element that is compatible with your Xlerator hand dryer model.
6. Assemble the hand dryer and connect it to the power supply to check if it works correctly before closing it up.

Replacing the heating element in your Xlerator hand dryer is a low-cost method of fixing it and getting it back to full functionality. You can order new heating elements directly from the manufacturer or purchase them from a licensed dealer. With these few steps, you can quickly troubleshoot your Xlerator hand dryer and get it back to drying your hands in seconds.

Not Turning On

If you are facing a problem with your Xlerator hand dryer not turning on, don’t worry. There might be a simple solution to your problem, and we are here to help you troubleshoot your Xlerator hand dryer.

Check The Power Source

The first and foremost thing to check when your Xlerator hand dryer is not turning on is the power source. Ensure that the hand dryer is properly plugged in and the power outlet is working. If it’s plugged in, try plugging it into another outlet to see if it’s a problem with the outlet.

Check The Electrical Board

If the hand dryer still does not turn on, then it’s time to check the electrical board. Sometimes, the electrical board may face issues due to power fluctuations or other reasons, leading to the hand dryer not working properly. Check all the connections and wires on the electrical board, and if you find any loose connections, tighten them appropriately.

Check The Sensor

Another reason why your Xlerator hand dryer may not turn on is the sensor. The hand dryer uses sensors to detect the user’s hands and initiate the drying process. Check whether the sensor is working correctly and whether it has become dirty or obstructed. Clean the sensor with a dry cloth and try again.

Conclusion

By following these simple troubleshooting steps, you can quickly identify the problem with your Xlerator hand dryer and solve it. In case if the issue persists, it’s better to contact a technician to resolve the issue.

Continuous Blowing

Continuous blowing is a common issue when troubleshooting the Xlerator hand dryer. This could be due to a faulty motor or sensor, and may require professional repair or replacement.

Continuous blowing is one of the common issues that people face with Xlerator Hand Dryer. During the continuous blowing, the dryer keeps on running even when the user’s hands are removed from the sensor. This issue not only wastes energy but can also pose a safety hazard. If you are facing this problem, don’t worry, we have got you covered. In this post, we will discuss some of the troubleshooting steps that can help you to fix this problem.

Check The Timing Circuit

One of the reasons why Xlerator Hand Dryer might keep on blowing is due to a faulty timing circuit. When the timing circuit malfunctions, it fails to keep track of the user’s hand movements and keeps the dryer running continuously. To fix this issue, you can check the timing circuit using a multimeter. First, locate the timing circuit board inside the dryer and remove it carefully. Then, use the multimeter to check the resistance of the timing circuit. If the resistance is not within the standard range, it’s time to replace the timing circuit board.

Check The Hand Sensor

Another reason why Xlerator Hand Dryer might keep on blowing is due to a faulty hand sensor. If the sensor is dirty or damaged, it might send incorrect signals to the timing circuit, leading to continuous blowing. To fix this issue, you can start by cleaning the hand sensor using a soft cloth or brush. If cleaning doesn’t work, you can replace the hand sensor entirely.

Replace The Control Board

If the above two troubleshooting steps don’t work, it might be time to replace the control board entirely. The control board is responsible for regulating the power supply to the timing circuit and hand sensor. When it begins to malfunction, it might produce power irregularities, leading to continuous blowing. To replace the control board, you can either purchase a new one from a certified dealer or ask for assistance from a professional technician. In conclusion, resolving continuous blowing issues in Xlerator Hand Dryer requires a little bit of knowledge and expertise. By following the steps we have discussed above, you can easily diagnose and fix the issue. However, if none of the above steps seem to work, it’s always safe to contact a professional technician and seek their assistance.

Sudden Stop

The sudden stop of Xlerator hand dryer can be a challenging issue to troubleshoot. It can be caused by various problems, including electrical issues, motor problems, or sensor malfunction. It is important to consult the Xlerator hand dryer manual or reach out to their customer support for assistance with troubleshooting and resolving sudden stop issues.

Xlerator hand dryers are known for their efficient drying time and energy-saving capabilities. However, like any other electrical device, they can experience sudden stoppages. If you have experienced a sudden stoppage in your Xlerator hand dryer, don’t worry! In this blog post, we will discuss troubleshooting steps you can take to fix it quickly and efficiently.

Check The Overheating Sensor

Xlerator hand dryers have built-in sensors that detect overheating and shut down the system to prevent further damage. If the overheating sensor is triggered, the hand dryer will stop suddenly. You can troubleshoot this issue by checking the sensor and ensuring it is clean and free of debris. If the sensor is dirty, gently clean it with a soft cloth to ensure proper functioning.

Check The Power Source

Another common reason for sudden stoppages is a power issue. Verify that the power source is working correctly. Check the circuit breaker or fuse-box to ensure that the circuit is not overloaded. You can also try unplugging the hand dryer and plugging in another electrical device to see if the socket is functioning correctly. If there is no power coming at the outlet or socket, contact the electrician for assistance.

Check The Control Board

Xlerator hand dryers have a control board that feeds information to the different components and systems in the dryer. If the control board malfunctions, it can result in a sudden stoppage. In this scenario, you may need to replace the Control Board. Check if the board has any visible signs of damage or rust. If it does, replace it at the earliest. In Conclusion: Xlerator hand dryers are built to last, but unexpected problems can arise along the way that can lead to sudden stoppages. If you are experiencing a sudden stoppage, follow the instructions discussed in this blog post to restore your hand dryer to its original condition. Remember, if you are not comfortable troubleshooting electrical devices, contact an expert for assistance.

Credit: www.exceldryer.com

Warm Air Flow

Warm air flow is crucial for effective hand-drying. However, if you are experiencing issues with warm air flow on your Xlerator hand dryer, you may need to run some checks. The following sections will help you troubleshoot the warm air flow issue.

Check The Heating Element

The heating element is responsible for heating up the air that is used for hand drying. If the heating element is not working, then the warm air flow will be non-existent. To check the heating element:

1. Switch off the power supply
2. Open the cover to gain access to the heating element
3. Check whether the heating element has any visible damage or breakage
4. If there is a breakage, you will need to replace the heating element
5. If there is no visible damage to the heating element, use a multimeter to test for continuity
6. No continuity means the heating element is faulty and needs to be replaced

Check The Thermostat

The thermostat regulates the temperature of the heating element. If the thermostat is not working, it will affect the warm air flow. To check the thermostat:

1. Remove the cover to gain access to the thermostat
2. Use a multimeter to test for continuity
3. If there is no continuity, the thermostat is faulty and needs to be replaced
4. If there is continuity, check whether the temperature is set correctly
5. Adjust the temperature to see if it improves the warm air flow

Check The Motor

The motor drives the fan that creates the warm air flow. If the motor is not working effectively, it will affect the warm air flow. To check the motor:

1. Switch off the power supply
2. Open the cover to gain access to the motor
3. Check whether the motor is blocked or has any visible damage
4. If there is visible damage, the motor needs to be replaced
5. If there is no visible damage, use a multimeter to test the motor for continuity
6. No continuity means the motor needs to be replaced

Clean The Filter

The filter is responsible for trapping the dust and dirt particles. A clogged filter can affect the warm air flow, so it’s essential to clean it regularly. To clean the filter:

1. Switch off the power supply
2. Remove the cover to gain access to the filter
3. Clean the filter with a soft brush or clean cloth
4. Reattach the filter and the cover

By following these troubleshooting steps, you should be able to fix the warm air flow issue on your Xlerator hand dryer.

Credit: www.exceldryer.com

Conclusion

The Xlerator hand dryer is known for its durability and efficiency in drying hands quickly. However, even the most reliable products can experience hiccups over time. Troubleshooting common issues like low airflow or unresponsiveness can save time and money in the long run.

By following simple solutions like cleaning filters or resetting the motor, users can ensure their Xlerator hand dryer continues to provide optimal performance. Don’t let minor issues interrupt your hand-drying experience; be proactive with troubleshooting for a seamless operation.