Why Your LG Dryer Won’t Turn Off and How to Fix It

This post contains Amazon affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

An LG dryer that keeps running—whether mid-cycle or after the timer hits zero—is more than just annoying. It wastes electricity, degrades your clothes, and can overheat internal components. In my experience troubleshooting electric appliances, this symptom usually points to one of five root causes: a stuck control button, a failed door switch, a defective moisture sensor, a broken timer, or a malfunctioning main control board. The exact cause determines both the urgency and the fix, so let’s walk through what’s really happening and how to safely restore normal shutdown behavior.


Common Causes of Continuous Operation

Cause Symptom Difficulty
Stuck power/start button Dryer responds to no inputs Easy
Faulty door switch Drum spins with door open Medium
Defective moisture sensor Runs past dryness detection Medium
Broken timer or control board Cycle never advances Hard
Stuck relay on board Motor or heater stays energized Hard

Stuck or Stuck-On Buttons

What Happens

LG dryers use capacitive touchcontrols or mechanical push-buttons. If debris builds up under the button or the internal membrane fails, the dryer may interpret the button as being held down permanently. For more on this, see our guide on lg dryer cl code turn off.

How to Check

  1. Visually inspect for buildup around the power or start buttons.
  2. Gently press and release each button—if nothing responds, assume it’s stuck.
  3. Try unplugging the dryer for 5 minutes to force a soft reset.

Fix

Clean around the edges with a cloth slightly dampened with rubbing alcohol. For persistent issues, replacing the control panel or individual switch is typically required.

✅ Tip: Avoid using harsh chemicals or abrasive tools near control panels—they can damage sensitive electronics.


Faulty Door Switch

Why It Matters

The door switch ensures the dryer stops spinning whenever the door opens. If it fails closed (i.e., thinks the door is always shut), the drum continues rotating even with the door open.

How to Inspect

  1. Open the dryer door fully.
  2. Look for a small plastic plunger near the door frame—that’s the actuator.
  3. Use a multimeter set to continuity mode:
    • With the door open: No continuity between terminals.
    • With the door closed: Continuity should exist.

If results are reversed or inconsistent, replace the switch.

Replacement Steps

  1. Unplug the dryer.
  2. Remove the front panel (consult your model’s manual).
  3. Locate and disconnect the old switch.
  4. Swap in the new part and reassemble.

🔧 Part note: Search by your full model number (e.g., DLEC8880W) for compatible replacements from LG or third-party vendors.


Malfunctioning Moisture Sensors

How Moisture Detection Works

LG dryers rely on moisture sensors—usually two metal strips mounted near the lint screen housing—to detect dampness. When clothes are dry, resistance increases, signaling the control board to end the cycle.

Over time, lint and fabric softener residue coat the sensors, reducing their sensitivity.

Signs of Sensor Failure

  • Drying takes significantly longer than usual.
  • Clothes come out overly hot or wetter than expected.
  • Timer doesn’t advance automatically—only manual timed cycles work.

Cleaning Process

  1. Remove the lint filter.
  2. Wipe the sensor strips gently with cotton swabs soaked in rubbing alcohol.
  3. Run a "Air Fluff" cycle without clothes to clear residual moisture.

🚫 Avoid: Fabric softener sheets; they contribute directly to sensor fouling.


Timer Issues (Digital vs Mechanical)

Modern LG dryers use microprocessor-based timers rather than mechanical ones. Still, faults in timing logic or related relays can mimic traditional timer failures.

Symptoms of Timer Problems

  • Cycle runs indefinitely regardless of load size or heat setting.
  • Display remains static—time won’t count down.
  • Heater stays on throughout the cycle.

Diagnosis

Use your dryer’s built-in self-diagnostic mode (varies by model):

  1. Press and hold both "Signal" and "More/Less" buttons simultaneously for 3 seconds.
  2. Scroll through error codes using arrow keys.
  3. Look for codes like dE, tE, or cE indicating communication or sensor problems.

Alternatively, connect a multimeter across the motor windings to verify voltage delivery during shutdown sequences.


Control Board Failures

Role of the Control Board

This is the digital brain coordinating every function—including turning the dryer off. Internal relays manage power flow to motors and heaters.

Signs of a Failed Relay

  • Dryer continues running after door opens.
  • Heater activates randomly outside programmed intervals.
  • Error codes flash repeatedly (like CF, oF) suggesting firmware anomalies.

Testing Approach

While advanced diagnostics require specialized equipment, visual checks help:

  1. Unplug the dryer.
  2. Remove the back panel to access the control board.
  3. Look for burned resistors, swollen capacitors, or cracked solder joints.

🔁 Replacement Note: Always match part numbers exactly with those listed inside your dryer’s rating plate or on the manufacturer's site.


Resetting Your LG Dryer

Sometimes a simple reset clears temporary glitches. Here's how:

  1. Disconnect power at the wall outlet or circuit breaker.
  2. Wait 5–10 minutes.
  3. Reconnect power and turn the dryer back on.
  4. Select a short cycle and observe behavior.

⚠️ Caution: Do not attempt resets while standing in water or with wet hands.


When to Call a Technician

Even skilled DIYers benefit from professional intervention in certain cases:

Scenario Reason
Multiple simultaneous symptoms Likely systemic failure requiring advanced diagnostics
Visible scorch marks or burnt smells Indicates dangerous overheating events
Warranty coverage still valid Unauthorized repairs void warranties
Complex disassembly involved Risk of misalignment or damage increases

For peace of mind, schedule certified LG service within 24–48 hours if basic troubleshooting fails.


Preventing Future Problems

Routine maintenance goes a long way toward avoiding unexpected breakdowns:

✅ Clean the lint filter after every load
✅ Deep-clean the exhaust duct annually
✅ Run empty cycles monthly to burn off oils and residues
✅ Store cleaning supplies away from the machine to minimize vapor exposure

Also, avoid overloading the dryer—it stresses the motor and reduces airflow efficiency.


Quick Troubleshooting Checklist

Before reaching out for support, walk through this checklist:

  • Is the power button responding normally?
  • Does opening the door halt tumbling immediately?
  • Are sensors clean and unobstructed?
  • Has the unit been reset recently?
  • Any unusual noises, odors, or error lights?

If yes to most items but the problem persists, deeper diagnostics may be warranted.


Final Thoughts

A dryer refusing to shut off isn’t merely inconvenient—it signals an underlying malfunction worth addressing sooner rather than later. Whether it’s a dirty sensor, broken door switch, or failing control board, identifying the root cause early helps restore safe operation and prevent costly secondary damages.

Take time to inspect accessible components first, but don’t hesitate to bring in a pro if electrical tinkering feels beyond comfort zones. Either way, keeping tabs on performance trends makes catching future issues easier—and safer.

My Lg Dryer Will Not Turn off
Image source: www.mallareddyecw.com


Frequently Asked Questions About LG Dryers Not Turning Off

How Do You Reset an LG Dryer That Won’t Turn Off?

Unplug the dryer for 5–10 minutes to drain stored energy from capacitors. Plug it back in and try again. If the issue returns, further inspection is likely needed.

Why Is My Dryer Not Shutting Off After Finishing?

This typically indicates either a failed timer relay, broken moisture sensor, or stuck button. Check for visible obstructions or signs of wear before assuming major component failure.

Where Is the Reset Switch on an LG Dryer?

Most models don’t feature a physical reset switch. Instead, disconnecting power briefly simulates a hard reset. Refer to your owner’s manual for model-specific instructions.

Why Does My Dryer Keep Running Even When the Timer Is Off?

Likely causes include a faulty control board relay, damaged door switch, or corrupted firmware. Professional diagnosis recommended unless confident accessing internal components.

Why Won’t My LG Dryer Turn Off Mid-Cycle?

Could stem from software glitch, stuck button, or defective sensor. Start by checking responsiveness of all buttons and cleaning contacts thoroughly before pursuing hardware replacements.


Related Articles You May Find Helpful

Understanding other LG-specific error messages can aid in broader troubleshooting efforts.

Each of these topics ties closely to overall system reliability and should be reviewed alongside routine maintenance practices discussed here.

Leave a Comment