Roper Electric Dryer Not Heating

A Roper electric dryer not heating is typically caused by a faulty heating element or thermostat. These components can easily be tested and replaced if necessary.

If you’re experiencing issues with your Roper electric dryer not heating, it’s important to identify the root of the problem. This can typically be attributed to a faulty heating element or thermostat, although other factors such as a blown fuse or faulty timer can also be to blame.

Fortunately, testing and repairing these components can be relatively simple and inexpensive, even if you lack expertise in appliance repair. We’ll explore some common reasons why your Roper dryer may not be heating, as well as some tips for troubleshooting and repairing the issue.

Roper Electric Dryer Not Heating


Possible Causes For Roper Electric Dryer Not Heating

When a Roper electric dryer is not heating, there could be multiple factors causing the issue. Some possible causes include a faulty heating element, broken thermostat, or malfunctioning timer. A professional technician should be called to diagnose and fix the problem.

Possible Causes for Roper Electric Dryer Not Heating If you are facing heating issues with your Roper electric dryer, it can be disappointing as it can cause immense inconvenience and disrupt your daily routine. However, identifying the root cause for your dryer not heating is crucial in resolving the issue. Here are possible causes of the Roper electric dryer not heating:

Faulty Heating Element

A faulty heating element could be the reason why your Roper electric dryer is not producing heat. The heating element is responsible for heating the dryer, and if it is defective, it will obstruct the heating process. A defective heating element can be easily identified and replaced.

Thermal Fuse Blown

If the thermal fuse in the dryer blows, it can lead to a disruption in the heating process. It is a safety mechanism that prevents the dryer from overheating, but if it blows, it will cut power to the heating element causing the dryer not to heat. A thermal fuse can be checked using a multimeter, but if you are not comfortable doing it yourself, consider hiring a professional electrician to replace the thermal fuse.

Failed Thermal Cut-off Fuse

A thermal cut-off fuse is another safety feature that regulates the amount of heat being generated by the dryer. In case of overheating, the thermal cut-off fuse cuts power to the heating element, ensuring the dryer doesn’t catch fire. If the thermal cut-off fuse fails, it can disrupt the heating process and cause your Roper electric dryer not to heat up.

Defective Thermostat

If your dryer is not heating up, there is a possibility that the thermostat is defective. The thermostat regulates the temperature in your dryer, and if it malfunctions, it can lead to your dryer’s heating process being interrupted. A defective thermostat can be easily diagnosed and replaced.

Malfunctioning Timer

The timer is vital in regulating the dryer’s heating and drying processes. If the timer begins to malfunction, it can interfere with the heating process and cause your Roper electric dryer not to heat. A malfunctioning timer can be replaced by a professional electrician.

Broken Start Switch

If the dryer start switch breaks, it can lead to the dryer not heating at all. Without this switch working, the dryer will not launch the heating process. A broken start switch can be easily replaced by a professional electrician, restoring the dryer’s heating process.

Clogged Venting System

A clogged venting system is a common issue that obstructs the airflow in the dryer, reducing its efficiency and causing it not to heat up properly. Ensure that the venting system is completely clean and free of any obstructions.

Power Supply Issues

If all the above issues are checked and found not to be the issue, the cause could be power supply problems. Check the circuit breaker to ensure it’s not tripped as it could be what’s causing the lack of power supply. In conclusion, identifying the underlying cause of your Roper Electric Dryer Not Heating is critical in resolving the issue and restoring your dryer’s efficient heating function.

How To Diagnose The Problem

Troubleshooting a Roper electric dryer that isn’t heating requires checking the heating element, thermal fuse, and thermostat. You should also inspect the power source and ensure that the dryer is receiving the correct amount of voltage.

If your Roper electric dryer is not heating up, it can be frustrating to deal with. However, diagnosing the problem is the first step towards finding a solution. In this section, we will go over how to diagnose the problem and the steps you need to take to fix it.

Check Power Supply

The first thing you need to do is to check the power supply. Ensure that the dryer is plugged into an electrical outlet and has a good electrical connection. Check the circuit breaker or fuse box to ensure that the circuit breaker or the fuse for the dryer is not tripped or blown.

Inspect Heating Element

If the power supply is not the problem, then inspect the heating element. Check if the heating element is broken or burned out. In case of any damage, the heating element needs replacement.

Test Thermal Fuses And Thermostat

If the heating element looks good, then test the thermal fuses and thermostat. A dryer has several thermal fuses, so check them one by one, and if any of them are blown, then replace them. Similarly, test the thermostat and replace it if it is not working.

Examine Venting System

A clogged venting system can also cause the electric dryer to stop heating, so examine the venting system. Clean the lint out of the venting system, and make sure there is no blockage. Additionally, check that the vent is not kinked or bent and that it is installed correctly.

Test Timer And Start Switch

Finally, check the timer and start switch. Make sure that they are functioning correctly. If they are not working, then these parts may need to be replaced or repaired. In conclusion, diagnosing the problem with your Roper electric dryer not heating up is the initial step to finding a solution. Check the power supply, inspect the heating element, test thermal fuses and thermostat, examine the venting system, and test timer and start switch. These steps can help you find the solution to your dryer problem.

Diy Fix Or Professional Repair?

DIY Fix or Professional Repair? A non-performing electric dryer can be frustrating. Imagine the inconvenience of having to line-dry clothes when a Roper electric dryer malfunctions. One of the most common problems with a Roper electric dryer is when it stops heating. When this happens, one may wonder – should I try to solve the problem on my own, or do I need a professional? The answer, however, depends on various factors. Below we discuss the different H3 sections on when to DIY and when to hire a professional to fix your Roper electric dryer

When To Diy?

Are you a competent DIY repair person? If your dryer stops heating, there are several things you can do before calling a professional repair service. One significant advantage of a DIY approach is the cost-saving aspect. Here are a few things you can do:

DIY Checks Description
Clean out the Vent If the ventilation is clogged, your dryer may not generate heat. Clean out the vent system thoroughly, then test to see if it works again.
Check the Heating Element Inspect and test the heating element to see if it’s working correctly. This includes checking the continuity of the heating element, replacing individual coils, or repairing any visible breakage.
Test the Thermal Fuse The Thermal fuse is another critical component to test if the dryer isn’t heating. Use a multimeter and test for continuity. Replace it if it’s blown.
Check the High-Limit Thermostat Do this if your dryer overheats, causing it to stop heating. Test it using a multimeter, and if it’s defective, replace it.

When To Call A Professional?

If you’re unsure of the dryer’s problem or have tried DIY repairs, but the dryer is still not heating, it may be time to call a professional. Several reasons would call for professional repairs beyond DIY capabilities:

  • The dryer is continuously shutting itself off.
  • There are scorch marks inside the drum or on the clothing.
  • You smell something burning when you run the dryer.
  • You hear unusual scraping, squeaking, or rattling noises.

When any of these occur, it’s best to have a professional service technician diagnose the problem. Remember, tinkering with a faulty electric device can cause considerable damage to you and your home if you’re not experienced in repairing such appliances.

Factors To Consider

Before deciding on fixing the Roper electric dryer, consider these two primary factors:

  • Cost: DIY repairs are more cost-effective compared to the hiring of a professional service technician for minor issues such as an overheated thermostat or clogged vent. However, if the problem is severe, hiring a professional may be necessary.
  • Expertise: Do you have the expertise to repair your dryer? If not, don’t risk making the problem worse. Hire a professional repair service to diagnose and repair the issue.

Ultimately, knowing whether you can DIY the repair or require professional help can be tricky. However, by considering the factors outlined above, you can make an informed decision about fixing your Roper electric dryer.

Roper Electric Dryer Not Heating


How To Replace Faulty Heating Element

To replace a faulty heating element on your Roper electric dryer, you will need to disconnect the dryer from its power source, remove the back panel, locate the element, and then unscrew it from the heater box. After that, simply replace the element with a new one and reassemble the dryer.

Replacing a faulty heating element in your Roper electric dryer requires a bit of technical expertise and handyman know-how. With the right tools and knowledge, however, it’s a task you can easily tackle yourself. In this section, we’ll guide you through the steps to replace your faulty heating element so you can get your dryer up and running again.

Gather Necessary Tools And Replacement Parts

Before you start, gather all the necessary tools and replacement parts. You will need a screwdriver, pliers, a multimeter, electrical tape, and a replacement heating element that matches your dryer model.

Disconnect Power Supply

To start the process, disconnect the dryer’s power supply by unplugging it or turning off the circuit breaker that powers the dryer. This ensures you don’t get electrocuted.

Remove Back Panel

Next, locate the back access panel on the dryer and remove it using a screwdriver. Be careful not to lose any screws.

Remove Old Heating Element

Once you’ve removed the access panel, locate the heating element assembly. Disconnect the wires that connect the heating element to the dryer using pliers. Remember to take note of the wiring configuration of the old heating element to ensure you reconnect the new heating element correctly. Remove the screws or mounting bolts that hold the heating element assembly in place and remove the old heating element.

Install New Heating Element

Put the new heating element in place and secure it using screws or mounting bolts. Reconnect the wires to the new heating element using pliers, ensuring you match the wiring configuration of the old element.

Reassemble Dryer

Once you’ve connected the new heating element, reattach the back access panel using a screwdriver. Verify that everything is in place and secure before turning the power supply back on. Test the dryer by running it and checking to ensure it heats up properly. In conclusion, replacing a faulty heating element in your Roper electric dryer is a task you can handle as a DIY project, so long as you have the necessary tools, replacement parts, and technical know-how. By following the steps outlined in this guide, you should be well on your way to having a working dryer again.

How To Replace Blown Thermal Fuse

To replace a blown thermal fuse in a Roper electric dryer that’s not heating, first unplug the dryer and locate the thermal fuse. Remove the wires from the old fuse and replace it with a new one of the same type.

Reconnect the wires and plug the dryer back in to test it.

If your Roper electric dryer is not heating, there may be a problem with the thermal fuse. A thermal fuse is a safety device that shuts off the dryer if it overheats. If it blows, the dryer will not heat up. In this section, we will guide you on how to replace the blown thermal fuse step by step.

Identify Location And Access Point

The thermal fuse is located on the blower housing or exhaust duct. To locate the thermal fuse:
  • Unplug the dryer or turn off the circuit breaker.
  • Remove the back panel of the dryer.
  • Locate the thermal fuse on the blower housing or exhaust duct.

Disconnect Power Supply

Before replacing the blown thermal fuse, make sure to disconnect the power supply from the dryer.
  • Unplug the dryer or turn off the circuit breaker.

Remove Old Thermal Fuse

Once the power supply is disconnected, you can remove the blown thermal fuse by following these steps:
  1. Disconnect the wires from the old thermal fuse.
  2. Remove the mounting screws that hold the thermal fuse in place.
  3. Take out the old thermal fuse.

Install New Thermal Fuse

Now it’s time to install the new thermal fuse. Follow these steps:
  1. Take the new thermal fuse and put it in place.
  2. Screw it securely using the mounting screws.
  3. Reconnect the wires to the new thermal fuse.

Reassemble Dryer

With the new thermal fuse installed, it’s time to reassemble the dryer. Follow these steps:
  • Screw the back panel of the dryer back in place.

Test Functionality

Finally, test the dryer to make sure everything is working correctly.
  • Plug the dryer back in or turn on the circuit breaker.
  • Turn on the dryer and check if it heats up.
  • If it heats up, then the replacement was successful.
With these simple steps, you can replace the blown thermal fuse and get your Roper electric dryer heating again.
Roper Electric Dryer Not Heating


Preventative Maintenance Tips

Maintaining a Roper electric dryer is crucial in ensuring it properly functions. To prevent the issue of no heat, regularly clean the lint filter, replace faulty parts, and hire a professional for yearly maintenance.

Cleaning Lint Filter

Cleaning the lint filter is an essential step in maintaining your Roper electric dryer. It is recommended to clean the filter after every use to prevent the dryer from overheating and not heating properly. Overheating can cause damage to the dryer’s thermostat and heating element.

Clearing Venting System

A clogged venting system can cause a Roper electric dryer not to heat. It is important to check and clear the venting system regularly. A clogged venting system can cause overheating and damage the dryer’s internal components.

Regular Inspections

Perform visual inspections of your Roper electric dryer regularly, and look for any signs of damage or wear and tear. Make sure to check the power connection, thermostat, heating element, drum belt, and other internal components.

Prompt Repairs

If you notice any issues with your Roper electric dryer not heating, make sure to address them promptly. Delaying repairs can cause additional damage to the dryer and lead to costly repairs in the future. Contact a professional technician to diagnose and repair any issues. In conclusion, following these preventative maintenance tips can help you avoid a Roper electric dryer not heating. Ensure to clean the lint filter after every use, clear the venting system regularly, perform regular inspections, and promptly address any repairs needed.


If your Roper electric dryer is not heating, it can take a toll on your everyday routine. But you do not have to worry because fixing it can be easy. Troubleshoot by checking the power supply, thermal fuse, heating element, and temperature switch.

Contact a professional if you still cannot identify the problem. With these tips, you can save time and money.

Leave a Comment