The Ge washer dryer combo not draining may be due to a clogged drain pump or a faulty drain pump motor. Check for any obstructions or kinks in the drain hose and clear them before trying to run the drain pump.
If the issue persists, the drain pump may need to be replaced. Many people enjoy the convenience of a washer dryer combo unit, but when something goes wrong, it can be frustrating. One common issue with these units is when the water does not drain properly.
If you’re experiencing this problem with your Ge washer dryer combo, the cause may be a clogged drain pump or a faulty drain pump motor. We’ll go over the steps you can take to troubleshoot and fix the issue to get your unit back up and running efficiently.
Credit: m.youtube.com
Troubleshooting A Ge Washer Dryer Combo Not Draining
Having a GE Washer Dryer combo not draining can be frustrating, especially if you have a pile of laundry to do. This issue can be caused by various factors, including a clogged drain hose, a malfunctioning pump, a faulty lid switch, or a broken belt. However, with the right troubleshooting steps, you can solve the problem and get your washer dryer combo back to working correctly.
Check The Drain Hose
The drain hose is responsible for carrying water out of the machine. If it is clogged or kinked, water will not be able to drain, resulting in a backup. Check the drain hose for any debris or blockage. Straighten any kinks, if there are any, or replace the hose if it’s worn out.
Inspect The Pump
The pump is responsible for removing water from the washer dryer combo. If it is damaged or malfunctioning, water won’t drain from the machine. Check the pump for any signs of damage or wear and tear. You might need to replace it if it’s faulty.
Clean The Pump Filter
If the pump filter is clogged with debris or lint, water will not drain from the machine. Find the pump filter, usually located on the lower part of the machine, and remove any debris. A clean filter will help the pump work correctly and improve draining.
Examine The Lid Switch
If the lid switch is faulty, the machine won’t drain water. The lid switch is responsible for detecting whether the lid is closed or open. If it is not working, the machine won’t activate the drain cycle. Examine the lid switch to determine whether it’s functional, and replace it if it’s malfunctioning.
Investigate The Control Board
The control board is responsible for managing the functions and programs of the washer dryer combo. If it’s faulty, it can cause a variety of issues, including the machine not draining water. Inspect the control board for any signs of damage or wear and tear. If it’s not working, consider replacing it.
Examine The Belt
The belt is responsible for transferring power to various components in the machine. If it’s broken or loose, the machine won’t drain water, among other issues. Check the belt for any damage or wear and tear. If it’s not working correctly, replace it.
Check The Motor
If the motor is not working correctly, it can cause a variety of issues, including the machine not draining water. Check the motor by inspecting for any signs of wear, damage, or disconnect. Inability to drain water might be due to a malfunctioning motor.
Consult A Professional
If you’ve tried all the above troubleshooting methods and still can’t get your GE washer dryer combo to drain water, it’s best to consult a professional repair service. They can diagnose and fix the issue for you, saving you time and stress.
Credit: www.haierappliances.com
Credit: www.bestbuy.com
Conclusion
After following the above-mentioned troubleshooting steps, we hope that your GE washer dryer combo draining issue is resolved. Remember to perform regular maintenance as it not only improves the machine’s performance but also prolongs its life. If the problem persists, don’t hesitate to seek help from a professional.
We hope that this guide has helped you to understand the common reasons behind the draining issue and how to fix it.