Wascomat Dryer Troubleshooting

For Wascomat dryer troubleshooting, you need to ensure that the machine is properly plugged in and the circuit breaker is not tripped. The Wascomat dryer may encounter some common issues that can be easily solved with a few troubleshooting steps.

Before calling a technician, make sure that the dryer is properly connected to the power source and the circuit breaker is not tripped. If the machine doesn’t start, check if the door is closed tightly and the lint filter is clean.

In case of unusual noises, emptying the pockets of garments might resolve the issue. If the dryer stops mid-cycle, ensure that the load is not too heavy and the venting system is not blocked. By following these troubleshooting steps, most common problems with the Wascomat dryer can be resolved without the need for professional help.

Common Problems With Wascomat Dryers

Wascomat dryers are a popular choice for commercial and residential laundry facilities. However, like any appliance, they can experience problems from time to time. Understanding and troubleshooting these issues can help you get your dryer up and running again efficiently. In this section, we will explore some of the most common problems that can occur with Wascomat dryers and offer solutions to resolve them.

Overheating And Safety Concerns

One of the most important factors to consider when using a dryer is safety. Overheating can not only damage your clothes but also pose a fire hazard. If you notice that your Wascomat dryer is overheating, it’s crucial to address the issue promptly. Here are a few potential causes and troubleshooting steps:

  • Clogged Ventilation: Ensure that the ventilation system, including the lint trap and exhaust duct, is clear of any obstructions. Regular cleaning and maintenance of these components can prevent overheating.
  • Thermostat Malfunction: If the dryer’s thermostat is faulty, it may not regulate temperature properly, leading to overheating. Consult the user manual or contact a professional technician to diagnose and replace the faulty thermostat if necessary.
  • Overloaded Dryer: Avoid overloading the dryer, as it can hinder proper air circulation and increase the risk of overheating. Remove some items and redistribute the load evenly for optimal performance.

Noisy Operation Or Vibrations

Unusual noises or excessive vibrations during dryer operation can be a cause for concern. These issues may indicate a mechanical problem or an imbalance within the machine. Consider the following troubleshooting tips:

  • Leveling the Dryer: Ensure that your Wascomat dryer is sitting on a leveled surface. Adjust the machine’s feet as needed to eliminate any wobbling or vibrations caused by an uneven surface.
  • Loose Components: Check for loose screws, bolts, or other components within the dryer. Tighten or replace them if necessary to eliminate any rattling or vibrating noises.
  • Dryer Load Imbalance: A load that is not evenly distributed can cause the dryer drum to become unbalanced, leading to noises and vibrations. Distribute the load evenly to prevent such issues.

Start-up Issues Or Failure To Turn On

Encountering problems while starting your Wascomat dryer can be frustrating, especially when you have a load of laundry waiting. Here are some possible causes and troubleshooting steps to resolve start-up issues:

  • Power Supply: Ensure that the dryer is securely plugged into a functioning power outlet. Check the circuit breaker or fuse to ensure it hasn’t tripped or blown. Reset or replace if necessary.
  • Door Switch: The door switch is a safety feature that prevents the dryer from operating when the door is open. If the dryer fails to start, check if the door is properly closed and the switch is functioning correctly.
  • Control Panel malfunction: If the control panel is not responding or displaying error messages, try resetting the dryer by unplugging it from the power source for a few minutes. If the issue persists, contact a technician for further assistance.

Troubleshooting common problems with your Wascomat dryer can often save you time and money on repairs. Remember to prioritize safety, perform regular maintenance, and consult a professional technician for more complex issues. By addressing these problems promptly, you can ensure your dryer operates efficiently, providing clean and dry laundry every time.

How To Identify And Resolve Overheating Problems

When your Wascomat dryer starts overheating, it can disrupt your laundry routine and potentially damage your clothes. It’s crucial to identify and resolve overheating problems promptly to ensure optimal dryer performance and safety. In this section, we will discuss three essential steps to help you troubleshoot overheating issues: inspecting for clogged air vents, checking the heating element and thermostat, and cleaning or replacing the air circulation fan.

Inspect For Clogged Air Vents

One of the primary causes of overheating in your Wascomat dryer is clogged air vents. When air vents become obstructed, heat cannot escape properly, leading to increased temperatures inside the dryer. To inspect for clogged air vents, follow these simple steps:

  1. Turn off the dryer and unplug it from the power source.
  2. Locate the dryer exhaust vent on the back of the machine.
  3. Remove any visible lint or debris using a vacuum cleaner or a soft brush.
  4. Inspect the exhaust vent system for any signs of blockage or restriction.
  5. If necessary, use a long flexible brush or a specialized vent cleaning tool to remove stubborn lint accumulations.

Regularly cleaning your dryer’s air vents is essential to prevent overheating problems and maintain efficient operation. Consider incorporating this task into your routine maintenance schedule.

Check The Heating Element And Thermostat

The heating element and thermostat play crucial roles in regulating and maintaining the proper temperature inside your dryer. If either of these components malfunction, it can result in overheating issues. Follow these steps to check the heating element and thermostat:

  1. Disconnect the power to your dryer.
  2. Access the heating element and thermostat, usually located behind the dryer’s front or rear panel.
  3. Carefully inspect the heating element for any visible signs of damage or wear, such as discoloration or breaks.
  4. Using a multimeter, test the continuity of the heating element. If there is no continuity, it indicates a faulty heating element that needs to be replaced.
  5. Next, test the thermostat for continuity. If it doesn’t have continuity at room temperature, it means the thermostat is faulty and requires replacement.

Regularly checking and maintaining the heating element and thermostat can help you avoid overheating problems and prolong the lifespan of your Wascomat dryer.

Clean Or Replace The Air Circulation Fan

The air circulation fan in your dryer is responsible for maintaining proper airflow and preventing overheating. Over time, dust and lint can accumulate on the fan blades, obstructing airflow and causing the dryer to overheat. To clean or replace the air circulation fan, follow these steps:

  1. Turn off and unplug the dryer.
  2. Remove the dryer’s front or rear panel, depending on the model.
  3. Locate the air circulation fan, usually positioned at the back of the dryer.
  4. Carefully clean the fan blades using a soft brush or cloth to remove any lint or debris.
  5. If the fan blades are damaged or heavily worn, consider replacing the fan to ensure optimal airflow and prevent future overheating issues.

By regularly cleaning and maintaining the air circulation fan, you can prevent overheating problems and maintain efficient drying performance.

Addressing Noises And Vibrations During Drying Cycles

Drying clothes efficiently and quietly is a top priority for any successful laundry business or homeowner. However, if you notice unusual noises or vibrations coming from your Wascomat dryer during its drying cycles, it is essential to address them promptly. Ignoring these issues can lead to further damage and even impact the overall performance of your machine. In this section, we will explore some common troubleshooting steps to help you identify and resolve these problems.

Examine And Tighten Loose Screws And Bolts

To begin addressing the noises and vibrations in your Wascomat dryer, the first step is to thoroughly inspect and tighten any loose screws and bolts. Over time, the constant movement and vibrations involved in drying clothes can cause these fasteners to become loose. This can result in various rattling or clanking sounds during operation.

To examine the dryer, start by unplugging it and then gently shaking the unit to identify any loose components. Once identified, using a screwdriver or appropriate tool, tighten the screws and bolts securely to ensure they are snug and stable.

Inspect The Drum Supports And Bearings

Another possible cause for the noises and vibrations in your Wascomat dryer is a worn-out drum support or bearing. These components are responsible for keeping the drum balanced and minimize friction during operation. Regular usage can cause them to wear down or become damaged, resulting in squeaking, grinding, or rumbling noises.

To inspect the drum supports and bearings, first, remove any items from the dryer and unplug the machine for safety. Open the access panel located at the rear of the dryer and locate the drum supports and bearings. Check for signs of wear, such as cracks or excessive play. If any issues are detected, contact a professional technician to replace the worn-out components and restore smooth operation.

Lubricate Or Replace Worn Drive Belts

A worn-out or improperly lubricated drive belt can also contribute to unusual noises and vibrations during your Wascomat dryer’s performance. The drive belt is responsible for rotating the drum, and over time, it may become loose, damaged, or dry, resulting in a screeching or squealing sound.

To address this issue, start by unplugging the dryer and accessing the belt located at the back of the unit. Inspect the drive belt for any signs of wear, such as cracks, fraying, or looseness. If the belt appears worn or damaged, it is advisable to replace it with a new one. Additionally, if the belt seems intact but lacks lubrication, apply an appropriate lubricant following the manufacturer’s instructions to eliminate any squealing noises.

By following these troubleshooting steps, you can address the noises and vibrations in your Wascomat dryer efficiently. Remember to always prioritize safety and consult a professional technician if you are unsure how to proceed or if the issues persist. Maintaining a well-functioning dryer not only ensures optimal performance but also extends the lifespan of your machine, allowing for hassle-free drying cycles and satisfied customers or family members.

Wascomat Dryer Troubleshooting

Credit: laundromania.com

Troubleshooting Start-up Problems And Power Failure

Encountering start-up problems or experiencing power failure with your Wascomat dryer can be frustrating, especially when you have loads of laundry waiting to be dried. To quickly identify and resolve these issues, follow the troubleshooting steps below.

Verify Power Supply And Electrical Connections

When your Wascomat dryer fails to start, the first thing you should check is the power supply and electrical connections. Start by:

  1. Ensuring that the dryer is properly plugged into a functioning power outlet.
  2. Checking if there are any loose or corroded electrical connections in the power cord.
  3. Inspecting the circuit breaker or fuse box to see if any breakers have tripped or fuses have blown.
  4. Testing the outlet with another device to ensure it’s supplying power.

If you find any issues during this verification process, resolve them accordingly. Tighten loose connections, replace blown fuses, reset tripped breakers, or call a professional electrician if needed.

Check Control Panel And Fuses

If the power supply and electrical connections are not the cause of the start-up problem, the next step is to check the control panel and fuses. Here’s what you need to do:

  1. Inspect the control panel for any error messages or indicators that may provide insight into the issue.
  2. Look for any blown fuses in the control panel. If you find one, replace it with a new fuse of the correct rating.
  3. Ensure that all control buttons and switches are in the correct position and not stuck.

By going through these steps, you can often identify and resolve control panel-related issues that prevent your Wascomat dryer from starting up.

Test And Replace Faulty Start Switch

If the start-up problem persists after verifying the power supply, electrical connections, and control panel, it’s time to test and potentially replace the faulty start switch. Here’s how:

  1. Disconnect the dryer from the power outlet and locate the start switch.
  2. Using a multimeter, test the switch for continuity when pressed. If there is no continuity, the switch is faulty and needs to be replaced.
  3. Refer to the dryer’s manual or contact Wascomat customer service for guidance on replacing the start switch.

A faulty start switch can often be the culprit behind start-up problems, and replacing it should resolve the issue.

By following these troubleshooting steps, you can effectively address start-up problems and power failure in your Wascomat dryer. However, if you are unable to resolve the issue on your own, it’s recommended to seek professional assistance to avoid causing further damage.

Optimizing Wascomat Dryer Performance And Maintenance Tips

One of the keys to maintaining an efficient and reliable Wascomat dryer is regular optimization and maintenance. By following some simple tips, you can ensure that your dryer performs at its best, leading to faster and more efficient drying cycles, lower energy consumption, and a longer lifespan for your machine. In this article, we will explore three important maintenance tips that will help you optimize your Wascomat dryer’s performance. These tips include cleaning the lint filter regularly, inspecting and cleaning ducts and ventilation system, and ensuring the proper load size for efficient drying.

Cleaning The Lint Filter Regularly

One of the most important maintenance tasks you can perform on your Wascomat dryer is regularly cleaning the lint filter. The lint filter traps lint and debris that accumulates during the drying process, and when it becomes clogged, it can negatively impact the dryer’s performance. By cleaning the lint filter regularly, you can prevent clogs and ensure optimal airflow, resulting in faster drying times and less strain on the machine.

Inspecting And Cleaning Ducts And Ventilation System

Another crucial step in optimizing your Wascomat dryer’s performance is inspecting and cleaning the ducts and ventilation system. Over time, lint and debris can build up in the ducts and vents, causing blockages that restrict airflow. This not only hampers the drying efficiency but also poses a fire hazard. By inspecting and cleaning the ducts and ventilation system regularly, you can prevent these issues and maintain optimal airflow, leading to faster and more efficient drying cycles.

Ensuring Proper Load Size For Efficient Drying

When it comes to drying clothes, it’s important to ensure that you’re loading your Wascomat dryer with the right amount of laundry. Overloading the dryer can lead to longer drying times and increased energy consumption, as the clothes won’t have enough space to tumble freely. On the other hand, loading the dryer with too few items can result in inefficient drying cycles, wasting energy and prolonging the drying process. By ensuring the proper load size for efficient drying, you can optimize your Wascomat dryer’s performance and reduce both energy usage and drying time.

Frequently Asked Questions Of Wascomat Dryer Troubleshooting

What Is The Code E14 On A Tumble Dryer?

The code E14 on a tumble dryer indicates a problem with the machine’s heat sensor or thermostat. You may need to replace the faulty part or contact a technician for assistance.

What Is Error 14 On Hoover Dryer?

Error 14 on a Hoover dryer indicates a problem with the heating element. It could be due to a faulty thermostat or a broken wire connection. Call a professional technician to diagnose and repair the issue.

How Do I Troubleshoot A Wascomat Dryer That Won’t Start?

To troubleshoot a Wascomat dryer that won’t start, check if the power cord is properly connected, the circuit breaker is not tripped, and the door switch is working correctly.

Why Is My Wascomat Dryer Not Heating Up?

If your Wascomat dryer is not heating up, check if the heating element is faulty, the thermostat is malfunctioning, or the exhaust vent is clogged with lint.

What Should I Do If My Wascomat Dryer Is Making Loud Noises?

If your Wascomat dryer is making loud noises, check if the drum support rollers are worn-out, the idler pulley is damaged, or the belt needs to be replaced.


To sum up, troubleshooting issues with your Wascomat dryer doesn’t have to be a daunting task. By following the simple steps outlined in this blog post, you can easily identify and resolve common problems. Remember to check the power source, clean lint filters, and inspect the venting system regularly.

With proper maintenance and troubleshooting, your Wascomat dryer can continue to efficiently dry your clothes for years to come.

Leave a Comment